In the HDD mud treatment system,the main equipment are shale shaker, mud cleaner,mud tank,mud agitator,jet mud mixer,etc.To meet the requirements of high-performance fluid,we can apply shear pump in the jet mud mixer instead of the common sand pump.
 |
| The Layout Diagram of Solid Control System in HDD |
In the preparation and processing of mud fluid, the traditional method is difficult to achieve direct bentonite hydration for the lack of high shear force.So it will take a long time more than 24 hours. Tianrui’s jet mud mixer equipped with JQB6545 shear pump will provide you a equipment for rapid preparation and processing of mud fluid. In the present fierce competition of the drilling solid control equipment market, it will undoubtedly bring good economic benefits to the enterprise through reducing the mud preparation time greatly.
Functions of JQB6545 shear pump:
 |
| Jet Mud Mixer |
It can greatly improve the degree of hydration of the bentonite soil in the drilling mud.The degree of dispersion and hydration of the particles in the drilling mud fluid water depends on the amount of the electrolyte in the drilling mud, the time, the temperature, the number and concentration of the surface-replaceable cations.It can save more than 30% bentonite if applied shear pump in case the same other conditions in the jet mud mixer system.
The shear pump allows the polymer to be cut and hydrated as soon as possible.The directly added polymer is not easy to hydrate because of its huge molecular mass. Therefore, the polymer is required to be pre-sheared. Shear pump can provide high shear efficiency, speed up the polymer dilution, hydration process.
Shear pumps provide higher flow and head lift to meet the requirements for the preparation and handling of mud.
 |
| Shear Pump |
The main parameters of JQB6545 shear pump in the jet mud mixer:
The meaning of JQB6545:
JQB - Chinese pinyin abbreviation for shear pump
65 - inlet size of 6 ", the outlet size of 5"
1, flow: 120m3 / h
2, head lift: 45m
3, impeller diameter: 300mm
4, impeller speed: 2900rpm
6, cutting efficiency: ≥ 95%
7, the motor power: 55kw- 2 level, 380v, 50Hz
8, Dimensions: 1150 × 1100 × 1500mm
9, weight: 1050kg
Xi’an TR Solid Control is not only one manufacturer of solid control system and equipment,but also an exporter of solid control system and equipment.TR will serve our clients all around the world with high quality solid control equipment.
Contact: Mark
Sales office：No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel：+86-29-86332919
Call：+86-13186019379
What’s App:13186019379
E-mail: mark@trsolidscontrol.com
No comments:
Post a Comment