Wednesday, September 19, 2012

desander,mud desander,drilling fluid desander

Desander is the second phase of drilling fluids process. They are also centrifugal device but removing sand or bigger particles from drilling fluid to prevent abrasion of the pumps. They are used to separate sand from drilling fluids which is mixed with drilling muds and big articles. During drilling process mud is being poured from inlet and is getting deeper. when the vortex in the hydroclone running, the water spray from a pipe and the mud ,soil,big articles subside down the outlet. That is the recycling of mud in order to separate water from mud and get a clean water that will be used in next excavations.

desander,mud desander,drilling fluid desander

mud desander,desander,drilling fluid desander

TRZQJ Mud Desander Technical Parameters 


Model
TRZQJ200S
TRZQJ250S
TRZQJ300S
TRZQJ200
TRZQJ250
TRZQJ300
Capacity
528GPM
792GPM
1056GPM
528GPM
792GPM
1056GPM
Cone Size
8
10
12
8
10
12
Work Pressure
0.150.35Mpa
Inlet Size
75100mm
100150mm
150200mm
75100mm
100150mm
150200mm
Outlet Size
125-150mm
150-200mm
200-250mm
125-150mm
150-200mm
200-250mm
Separationg
47-76μm
47-76μm
47-76μm
47-76μm
47-76μm
47-76μm
Screen Area
1.0m ²

Design Principles: TR desander is produced by an advanced design, careful engineering, quality materials and finest workmanship which comprising 8, 10, and 12 inches cone diameter. As desanders have varying capacity based on its diameter.
Operation Mechanism: Desander include two 12-in.(305-mm) diameter polyurethane hydroclones slant mounted over the shaker. Each desander clone includes four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. The desander is furnished with an 8-in.(203-mm) diameter feed manifold and a 10-in (254-mm) diameter discharge manifold and a 0-60 psi (4.1-bar) pressure gauge. The desandder also includes a solids discharge trough to distribute the hydroclone underflow evenly onto the screening surface.
TR is a professional manufacturer of
solid control system/equipment in china. We will provide our clients high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. You are welcomed to consult or visit us any time.
Contact:TR Solids Control
Sales officeNo.10 West of North 2nd Ring Road Xi'an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi'an City.
Tel+86-29-86332919
Call+86-13186019379
Webwww.trsolidcontrol.com
      www.trsolidscontrol.com
      www.chinasolidscontrol.com

vacuum degasser,desgasser,tr vacuum degasser

Vacuum Degasser are used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclones and centrifuges follow in the arrangement.
Operational Theory: Vacuum degassers utilize negative pressure by vacuum pump to withdraw entrained gases from the mud. In order for this to work, mud is pumped through a venturi, which develops a negative pressure in the vessel by vacuum pump, thus sucking mud into the unit. The choice between horizontally- or vertically-mounted units is typically based on the footprint requirements of the specific rig.
TR manufactures TRZCQ series Vacuum Degasser is a special-purpose device and a new type one for the treatment of gas in the drilling fluids. It can get rid of various gas of invasive drilling quickly. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Also, at the same time vacuum degasser can be used as a heavy-power agitator and supported applicable to all types of mud circulation purification system.
Atmospheric degassers, on the other hand, are simple in design and operation. These units mechanically remove gas, but instead of solely relying on density differences between the gas and the mud, whereby the gas liberates itself automatically.
Vacuum degassers are just a few of the many solids control and waste management offerings that TR Solid Control supplies to the oil and gas industry.

vacuum-degasser-manufacturers,desgasser,oil-drilling-solid-control-equipmentvacuum-degasser-manufacturers,desgasser,oil-drilling-solid-control-equipment

 TRZQJ  Vacuum degassers Technical Parameters

Model
ZCQ240
ZCQ270
ZCQ300
ZCQ360
Main diameter
700mm
800mm
900mm
1000mm
Capacity
240 m³/h
270 m³/h
300 m³/h
360 m³/h
Vacuum
-0.030-0.045Mpa
-0.030-0.050Mpa
-0.030-0.045Mpa
-0.030-0.045Mpa
Ratio
1.68
1.68
1.68
1.72
Efficiency
95%
95%
95%
95%
Motor power
15kW
22kW
30kW
37Kw
Vacuum Power
2.2kW
3kW
4kW
7.5kW
Rotary speed
860r/min
870r/min
876r/min
880r/min
Dimension
1750×860×1500
2000×1000×1670
2250×1330×1650
2400×1500×1850
Weight
1100kg
1350kg
1650kg
1800kg
 TR solid control is a professional manufacturer of solid control system/equipment in china. We will provide our clients high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. You are welcomed to consult or visit us any time. 
Contact:TR Solids Control
Sales officeNo.10 West of North 2nd Ring Road Xi'an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi'an City.
Tel+86-29-86332919
Call+86-13186019379
Webwww.trsolidcontrol.com
      www.trsolidscontrol.com
      www.chinasolidscontrol.com

shale shaker,linear shale shaker

TR series shale shaker is the first phase solid control equipment in oil drilling system. Shale shaker is mainly used to remove the drilling cuttings return to the ground from wellhead, so as to meet the basic requirements of the next equipment in the oil drilling. If the shale shaker can't working properly, it will affect other follow-up solid control equipments. Therefore, shale shaker is an essential solid control equipment. TR Solid Control is a professional manufacturer which combines R&D, production, marketing and technology service. All the two types of elliptical and linear shale shaker can be applied in all kinds of the petroleum drilling machine and drilling fluid circulatory system.Welcome to consulting and chose drilling shale shaker!

mud shale shaker,drilling shale shaker,line vibrating shale shaker,solidcontrol

mud shale shaker,drilling shale shaker,line vibrating shale shaker
Contact:TR Solids Control
Sales officeNo.10 West of North 2nd Ring Road Xi'an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi'an City.
Tel+86-29-86332919
Call+86-13186019379
Webwww.trsolidcontrol.com
      www.trsolidscontrol.com
      www.chinasolidscontrol.com